691 CS Series

For control automation applications, using CAN bus,they are interfacing with an control unit to drive auxiliary functions such as expanding control system capability with on-board I/O.

691-H1X Controller S 681-H1X Controller S 681-H1X Controller S
MO 691.H1X I/O module MO 691.H3X I/O module MO 691.H9X I/O module

 


681-H1X Controller B
MO 691.H1X I/O Module with CAN Bus
  • Features:
        - USB2CAN Interface for Configuring Device
        - Up to 19 Digital Inputs
        - Up to 8 Analog Inputs
        - Up to 19 Low-Side Outputs (500 mA/ch)
        - Up to 6 High-Side Outputs (1 A/ch)
  • Communications: CAN Bus ( J1939 / CANopen )
  • Casting Material: GF 30 % Polyamid
  • Operating Voltage: 8(12)~32 VDC
  • Operating Temperature: -40°C ... +80°C
  • Protection: IP67
  • Connector: 23 Pin Tyco Seal
 
691.H10  19 Digital Inputs
691.H11  9 Digital Inputs  , 8 Analog Inputs (5 Volt Ref.Supply)
691.H12  19 Low Side Outputs
691.H13  13 Low-Side Outputs , 6 High-Side Outputs
691.H14  8 Digital Inputs , 4 Analog Inputs (5 Volt Ref.Supply) , 3 Low-Side Outputs , 2 High-Side Outputs
691.H15  4 Digital Inputs , 13 Low-Side Outputs , 2 High-Side Outputs

 


691-H1X Controller B
MO 691.H3X I/O Module with CAN Bus
  • Features:
      Software configurable controller with fault detection for inputs and outputs, monitoring of power supply for under-voltage and over voltage, internal watchdog
      - USB2CAN interface for configuring device and diagnostics
      - Multifunction inputs (voltage,current,resistance,frequency)
      - Software selectable input functionality
      - Up to 4 Proportional Valve Drivers (0-2.5 A per channel)
      - Up to 2 High-Side Switch Outputs (0-1.5 A per channel)
      - Current sensing and protection for a outputs
  • Communications: CAN Bus ( J1939 / CANopen )
  • Casting Material: GF 30 % Polyamid
  • Supply Voltage: 8~32 VDC
  • Operating Temperature: -40°C ... +80°C
  • Protection: IP67
  • Connector: 23 Pin Tyco Seal
 
691.H30  INPUT: Multiple Digital, Analog Inputs / OUTPUT: 4 Proportional High Side Switch , 2 On/Off High Side Switch

 


681-H1X Controller B
MO 691.H9X I/O Module with CAN Bus
  • Features:
      - USB2CAN Interface for Configuring Device
      - Up to 7 Digital Inputs
      - 4 Analog Inputs
      - 4 Low-Side Outputs (500 mA/ch)
      - Up to 1 High-Side Output (1 A) (shared with 1 digital input)
      - 3 Relay Outputs (8 A/ch)
  • Communications: J1939 or CANopen protocol
  • Casting Material: GF 30 % Polyamid
  • Supply Voltage: 8(12)~30 VDC
  • Operating Temperature: -40°C ... +80°C
  • Protection: IP67
  • Connector: 23 Pin Tyco Seal
 
691.H90 7 Digital Inputs, 4 Low Side Outputs, 1 High-Side Outputs, 3 Relay Outputs
691.H91 2 Digital Inputs, 4 Analog Inputs , 4 Low Side Outputs , 1 High-Side Outputs , 3 Relay Outputs