Inclination Sensor with Gyro

Inclination sensors measure deviation and absolute position from the horizontal position of up to 360°. These sensors enable simple and reliable position detection, platform leveling and monitoring of inclination angle in cranes, construction equipment, agricultural machinery and many other areas.

415-H1X Inclination Sensor S 416-H1X Acceleration Sensor S
MO 415.H1X 
Inclination Sensor
Analog Output
MO 415.H13
 Inclination Sensor
CAN Bus
 
General Specifications
● High accuracy and precision
● Less sensitive to vibration due to integrated gyroscope sensor
● Digital filter for vibration suppression
● Programmable parameters
● Zero point setting for each axis (CAN type only)
● Status indication via three LEDs
● Rugged and compact design
 

 415-H1X Inclination Sensor B
MO 415.H1X Inclination Sensor with Gyro - Analog Output
  • Technology: 6D IMU (3D Accelerometer + 3D Gyroscope)
  • Detection Area:
      - Two Axis Type: ±15°, ±30°, ±45°, ±60°, ±80° per axis
      - One Axis Type: ±180°
  • Connector: M12x1, 8-pin
  • Casting Material: GF 30 % Polyamid
  • Readiness Delay:  < 300 ms
  • Absolute Accuracy: ≤ ±0.2°
  • Repeat Accuracy:  ≤ ±0.1°
  • Resolution:  ≤ 0.05°
  • Refresh Rate: ≤ 20 ms
  • Operating Temperature: -40°C ... +85°C
  • Protection: IP67
  • Display:  1 Power & 2 Indicator LEDs
  • Supply Voltage: 12~30 VDC 
  • Output Options:
      ● 0-5 V (max. 1 mA) + 2 Digital HS Outputs (1A/ch)*
      ● 0.5-4.5 V (max. 1 mA) + 2 Digital HS Outputs (1A/ch)*
      ● 0-10 V (max. 1 mA) + 2 Digital HS Outputs (1A/ch)*
      ● 4-20 mA Current Output + 2 Digital HS Outputs (1A/ch)*
  • *Programmable switching points for digital outputs.
 

 416-H1X Acceleration Sensor B
MO 415.H13 Inclination Sensor with Gyro - CAN Bus
  • Technology: 6D IMU (3D Accelerometer + 3D Gyroscope)
  • Detection Area:
      - Two Axis Type: ±80° per axis
      - One Axis Type: ±180°
  • Connector: M12x1, 5-pin
  • Casting Material: GF 30 % Polyamid
  • Readiness Delay:  < 300 ms
  • Absolute Accuracy:  ≤ ±0.2°
  • Repeat Accuracy:  ≤ ±0.1°
  • Resolution:  ≤ 0.05°
  • Refresh Rate:  ≤ 20 ms
  • Operating Temperature: -40°C ... +85°C
  • Protection: IP67
  • Display: 1 Power & 2 Indicator LEDs
  • Supply Voltage: 8~32 VDC
  • Output Options: SAE J1939 / CANopen