Makersan MO 662 HMI Display Screen 7 inch

MO 662

HMI Display 7″

  • User configurable or custom software
  • ARM Cortex M4, 32 bit
  • 1x CAN Bus (SAE J1939)
  • < 2 seconds boot time
  • 7″ TFT – 800×480 24 bit RGB
  • All O’clock – view angle
  • 1000 cd/m2 brightness
  • 800:1 contrast
  • -30 … +85°C operating temperature
  • RTC buffered with a supercap
  • 85dB configurable piezo-buzzer
  • Automatic dimming through an ambient light sensor or manual
  • IP67
Makersan MO 662 HMI Display Screen 7 inch Type 3
Makersan MO 662 HMI Display Screen 7 inch Type 4

Order Code

MO 662 -

HXXX -

Hardware

SXXXX -

Software

PXXX -

Image Library

EXX

Add-On Board


H10 - 5 Active-Low Inputs, 3 Active-High Inputs, 2 Frequency Inputs, 2 Resistor Inputs

S1000 - Default


P001 - Default


E10 - Default


H11 - 5 Active-Low Inputs, 2 Active-High Inputs, 1 Voltage Input, 1 Resistor Input, 1 High-Side Output

*

*

*

H12 - 2 Active-Low Inputs, 1 Resistor Input


H1A - Only CANbus

H20 - 6 Active-Low Inputs, 3 Active-High Inputs, 9 Voltage Inputs, 2 Current Inputs, 2 Frequency Inputs, 5 Resistor Inputs, 2 Low Side Out with 5V Ref Output

H21 - 10 Active-Low Inputs, 5 Active-High Inputs, 10 Voltage Input, 1 Frequency Inputs, 3 Resistor Input, 1 Low Side Out with 5V Ref Output

H22 - 8 Active-Low Inputs, 14 Active-High Inputs, 2 Voltage Input, 2 Frequency Inputs, 3 Resistor Input with 5V Ref Output

* Available upon request with minimum order quantity

Example: MO 662 – H10 – S1000 – P100  is 5 Active-Low Inputs, 3 Active-High Inputs, 2 Frequency Inputs, 2 Resistor Inputs with SAE J1939 interface. 

Ask about this product